Chevrolet Camaro SS 6.2L LT1 2016+ Magnuson Supercharger
Boost the power output of your 2016+ Chevrolet Camaro SS 6.2L LT1 while retaining factory-like drivability, fuel economy, and reliability with Magnuson’s TVS2300 Supercharger Kit. This kit delivers tire shredding power of 550+ horsepower and 510+ foot-pounds of torque at the rear wheels @ 6 psi. Besides peak horsepower and torque this supercharger offers significantly enhanced "under the curve" power gains delivering near instantaneous boost and torque upon demand that really puts you back in your seat.
Magnuson’s TVS2300 supercharger utilizes EATON’s latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson’s patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors.
These superchargers are all manufactured in our TS16949 certified facility – the highest ISO OEM quality certification standard in the market. Backed by a 3-year/36,000 mile warranty this supercharger is built to last. Designed to be nearly maintenance free you won’t have to worry about anything once it is installed.
Fitment
- 2016+ Chevrolet Camaro SS 6.2L LT1
Features
- TVS2300 Heartbeat Hybrid-roots supercharger
- Clears the factory Camaro hood and requires no body modifications
- TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
- Provides cooler discharge temperatures than comparable twin-screw systems
- Advanced high-flow inlet forward design Includes
- Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
- Acoustically designed to minimize noise, vibration, and harshness (NVH)
- Better air-handling characteristics than comparable superchargers 100% complete bolt-on system which can be installed in one day
- More power in a smaller package
- Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
- Delivers a proven increase in real world "under the curve" power
- High thermal efficiency 2.4 pressure ratio capability
- High helix four-lobe rotors with 160 degrees of twist
- Redesigned inlet and outlet ports
- Utilizes all factory "push-lock" connectors
- Displacement on demand hardware retained for improved fuel economy
- Components have been independently tested to GM’s specification
Intercooler System
Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology Back-to-back testing verifies the intercooler system is superior Quick-connect fittings for easier installation
Upgrade Options
- Upgradable throttle body adaptor available for large throttle bodies
- Drive pulley options available for high-boost applications
Included Components
- 6th Generation TVS2300 Heartbeat Supercharger with integral bypass valve
- Patented cast-aluminum high-velocity-port intake manifold
- Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
- Large front-mounted heat exchanger
- All necessary fittings, lines, belts, and hardware required
Warranty
- Supercharger - 3 Year / 36,000 Mile Limited Warranty on supercharger hardware.
- Electronics - 1 Year Limited Warranty on electrical components.
- Standard Power Train - 3 Year / 36,000 Mile Limited Power Train Warranty.
- Optional Power Train - 5 Year / 60,000 Mile Limited Power Train Warranty.
Maintenance
- Sealed supercharger rotor assembly requires no maintenance or oil change
Emissions Status
- CARB Pending
Tools Required
- Metric wrench set
- 1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard andamp; Deep)
- 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
- Belt tensioner wrench
- Phillips and flat-head screwdrivers
- 1/2in. breaker bar
- Fuel line quick disconnect tool (included in kit)
- Small or angled 3/8in. drill
- Drain pan
- Hose cutters
- Hose clamp pliers
- Safety glasses
- Torque angle meter
- Hammer
- Compressed air
- Blow gun air tool
- Metric Allen socket set 3/8in. drive
- Shop vacuum cleaner
- Blue Loctite
- Right Angle drill for pinning crank pulley (when required)
- Helpful Tool: Air or electric impact wrench